Double tap to zoom
- Lightweight (Lightest in STIHL range)
Lightest saw in the STIHL range.
- Top handle (T)
The top-handle model is specially designed for in-tree professional use only!
- Side-Access Chain Tensioner
The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
- More Power, Reduced Emissions
Provides excellent power with low exhaust emissions.
- Adjustable Automatic Oiler
The Adjustable Automatic Oiler allows the user to adjust the lubricant of the guide bar and saw chain for different bar lengths and cutting conditions.
- STIHL Easy2Start™ (E)
The STIHL Easy2Start™ system makes starting STIHL outdoor power tools almost effortless, eliminating the need for a strong pull of the starting cord. This advanced starting system is designed to make starting STIHL products easier. The specific system may vary by model, but in each case, a quick pull overcomes the engine’s compression to minimize the strength and effort required to start. Available on selected products.
- Built-in retractable carry ring
The built-in carry handle makes it convenient and easy to maneuver in and out of trees.
- STIHL OILOMATIC® Saw Chain
STIHL makes its own saw chain.
- Purge Pump Primer
The purge pump primer feature enables the user to prime the carburetor with fuel, enabling easier starting. The purge pump primer is designed in a way that the operator cannot flood the machine by priming the carburetor too many times. Flooding the engine is still possible if the choke is not removed after the engine turns over.
- Master Control Lever™
The Master Control Lever™ is an easy to use single lever, operating the choke, starting throttle lock and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.
A lightweight saw consider that it’s easy to maneuver.
- Ease of Use with Less Fatigue
The lightweight and easy-to-use MS 151 T C-E minimizes fatigue, allowing users to work longer and get more done.
- STIHL Quickstop®
STIHL chainsaws are equipped with a chain stopping system designed to reduce the risk of injury in certain kickback situations. It is called a STIHL Quickstop® chain brake. The STIHL Quickstop® chain brake is designed to stop the rotation of the chain if activated by the operator’s hand or by inertia if the saw kicks back with sufficient force. In some working positions, the STIHL Quickstop® chain brake can be activated by inertia, stopping the chain within fractions of a second.
- IntelliCarb™ Compensating Carburetor
The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.
|POWERHEAD WEIGHT||5.7 lbs.|
|GUIDE BAR LENGTH (Recommended)||12 in.|
|OILOMATIC® CHAIN||1/4" PM3|
|CHAIN OIL CAPACITY||5.07 oz.|
|ENGINE POWER||1.41 bhp|
|FUEL CAPACITY||6.76 oz.|
|DISPLACEMENT||1.44 cu. in.|
|Note: STIHL recommends #3670 (71 PM3 64) OILOMATIC® saw chain and 12” 3005 008 3405 Ematic™ guide bar combination. Compatible guide bar ranges: 10" to 12"|