Features
Reduced-Emission Engine Technology - Caring for Nature
The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.
Weather-Resistant Design
The weather-resistant design gives users the advantages of a powerful tool with a sturdy construction.
Toolless and semi-transparent bar and chain oil tank
Semi-transparent bar and chain oil tank for easy oil level check
Robust branch hook
Robust branch hook to remove loose clippings from trees
10” guide bar combination using ¼” STIHL PICCO™ saw chain
Smooth, clean cuts with minimum chain friction thanks to the 10” guide bar with ¼” STIHL PICCO™ saw chain
Quick and easy length adjustment – no tools required
Users can easily adjust the shaft length without the need for tools.
Easily telescopes from 8.8‘ – 12.8‘
The telescoping shaft extends from 8.8‘ – 12.8‘, allowing users to access hard-to-reach areas.
Variable-Speed Trigger
Variable-speed trigger allows precise control for each task.
Same rigid telescoping shaft from gas-powered HT 135
Same rigid telescoping shaft as found on gas-powered HT 135 – extends four feet
Retaining Latch
All STIHL Battery powered products feature a retaining latch that is designed to prevent the unit from unintentional starts when the battery is inserted.
Multi-Function Control Handle
Having easy access to all of the controls on one comfortable handle helps makes it easier to complete tasks so the operator’s hand never has to leave the handle.
Telescoping Pole
With an adjustable shaft, telescoping pole pruners can cut branches up to 16 feet above ground.
STIHL Electric Motor
Lightweight and compact, STIHL electric motors require minimal maintenance and feature low noise levels and reduced vibration.
Balanced design
Balanced design makes it comfortable to use.
Specifications
POWER SOURCE | Battery |
POWERHEAD WEIGHT | 10.1 lbs. |
WEIGHT (w/ AP 200) | 13 lbs. |
GUIDE BAR LENGTH (Recommended) | 10 in. |
OILOMATIC® CHAIN | 1/4" STIHL PICCO™ |
OVERALL LENGTH | 126 in. |
BATTERY SYSTEM | AP System |
RUN TIME (w/ AP 200) | 42 min. |
VOLTAGE | 36 volt |
Note: The actual listed guide bar length can vary from the effective cutting length based on the gear head design. Guide bar, saw chain, and scabbard must be purchased separately. The battery working time specifications for each battery charge are estimates and may vary depending on how the tool is used and what is being cut.